:	Jul 14, 2004

.

Disconnect the battery ground cable.

.

Remove the engine cover.

.

:   Left-hand shown, right-hand similar. Release the EGR valve outlet tube.   Release the clip.

.

:   Left-hand shown, right-hand similar. Release the EGR valve outlet tube.   Disconnect the engine wiring harness.   Remove the Torx screw.

.

:   Left-hand shown, right-hand similar. :   Discard the gasket. :   Discard the retaining clip. Remove the EGR valve outlet tube.   Remove the two bolts.

.

:   Install a new retaining clip. :   Install a new gasket. :   Do not fully close the retaining clip at this stage. Loosely install the EGR valve outlet tube.   Install the two EGR valve outlet tube retaining bolts, but do not fully tighten at this stage.

.

Fully close the EGR valve outlet tube retaining clip.

.

Tighten the EGR valve outlet tube retaining bolts to 10 Nm (7 lb.ft).

.

Secure the engine wiring harness.   Install the Torx screw and tighten to 5 Nm (4 lb.ft).   Secure the engine wiring harness to the bracket with the clip.

.

Install the engine cover.

.

Connect the battery ground cable.